Fandesensor

⚠️ Your DCS struggling with square root calculations for 50 flow meters?

We've been there. Flow through an or***ce is proportional to the square root of differential pressure. That's a lot of CPU overhead.

💡 The fix? We installed the 𝗗𝗥𝟯𝟰𝟮𝟭 differential pressure transmitter. It handles square root extraction on-board for flow measurement and level calculation.

Result: DCS load dropped instantly. No more lag.

🔧 Have you offloaded calculations to smart transmitters? What's your experience?



🔗

DR3421 Differential Pressure Transmitter The differential pressure transmitter adopts high-performance pressure sensor, high static pressure, anti-interference.

A 2-second spike caused a 2-hour shutdown. 😤

Cold oil is thick. At startup, pressure spikes are normal. But a switch without delay sees a 'fault' and shuts everything down.

We installed the 𝗗𝗥𝟯𝟲𝟬𝟮. Its programmable delay timer ignores startup spikes. No more false trips. No more downtime.

Agree or disagree? Let us know below! 🔧💡



🔗 https://www.fandesensor.com/products/pressure-switches/dr3602-pressure-switch/

Tired of questionable low-pressure readings from analog gauges? ⚠️

Mechanical friction in delicate movements kills resolution. 🔧

We switched to the DR3701 handheld digital pressure gauge. Peak-hold captures maximum pressure in the field. 💡

No more guessing. Real data. Every time. 📊

Agree or disagree? Let us know in the comments! 🚀



🔗

DR3701 Digital Pressure Meter DR3701 digital pressure meter offers 4 digital display, automatic shutdown in 1-15min, continuous work 2000 hours for air, gas, water gauge.

Every pump-out, we pulled rags off the sensor. Every. Single. Time. 😤

Recessed ports are debris traps. Rags, wipes, solids—all collect in the cavity.

We installed the DR6411. Flush diaphragm. Nothing to trap. Nothing to clog. 🎯

What's your take on this? 🔧💡



🔗 https://www.fandesensor.com/products/level-sensor/dr6411-liquid-level-sensor/

Spent weeks chasing noise on a VFD-driven pump skid. 🎯

Filters? Check. Rerouted cables? Check. Shielded cable? Helped, but not enough.

Then we swapped to the DR3411 sensor. 🔧

Its onboard EMI filtering stops common-mode noise right at the sensor head. No more false readings. No more downtime.

𝗔𝗴𝗿𝗲𝗲 𝗼𝗿 𝗱𝗶𝘀𝗮𝗴𝗿𝗲𝗲? Drop your experience below. 👇



🔗 https://www.fandesensor.com/products/pressure-sensor/dr3411-anti-interference-pressure-transmitter/