Digital Electronics PLC

📌12-24 v dc motor

♦️Voltage: 24V DC
♦️Power Output: 30W
♦️Rated Speed - 2400 RPM
♦️Rated Current: Approx. 2.2A
♦️Torque: High torque output
👉 Telegram (https://t.me/digitalelectronics_tech)
👉 Instagram (https://www.instagram.com/digitalelectronics_tech?igsh=MWNscGdqN3F1b3Z0bw%3D%3D&utm_source=qr)
👉 TikTok (https://www.tiktok.com/.tech)
👉 YouTube (http://www.youtube.com/)
👉E-commerce website (https://digitalelectronics.et/)

📌Price 2500
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

📌Single blade spiral milling cutter

♦️Material: Solid Tungsten Steel/Carbide.
♦️Coating: Typically Nano Blue Coating (increases hardness and wear resistance).
♦️Design: Single flute spiral design, often with a high rake angle for faster, smoother cutting and effective chip evacuation.

📌Price 1750
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

📌RAMPS 1.4 Shield – 3D Printer Control Board

♦️Standard interfaces (as that of extruder)
♦️Reserved GCI like I2C and RS232
MOSFET 3 MOSFET are applied to the heater/ fan and thermistor circuit.
♦️Another 5A added to protect the component parts.
♦️An 11A fuse is added to the hotbed
Support 5 stepper drive board
♦️The adoption of Pin Header as pololu makes it more convenient to repair or change.
♦️I2C and SPI are reserved for expanding
♦️All the MOSFET can be controlled by PWM
♦️Use the interface of servo motor to adjust the level of printing platform automatically.
♦️ Adding a SD module for SD ramps module.
♦️LED can indicate the status of the heater (the open and close of MOS).

📌Price 2000
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/