Yeti Workshop

💥💥💥

🍊🍋🍊

It was supposed to be a kunai, but during the work I came to the conclusion that if you just extend the cut, it will turn out to be a nice knife. In this way, a new project was born, still without a name.

The knife is 5.2 mm thick, so throwing is fun, made for throwing without spinning. "Bottom" main edge 0.5 mm ready for sharpening. Fake about 1.2 mm also to be sharpened.
The hole at the end will be finger-sized and the 2 "spikes" at the back will be sharp.