PSTech

WE ARE HIRING -To apply: Send your recently updated Curriculum vitae to [email protected] / Or log on to the following website: - https://pstechqatar.com/ or send your CV to WhatsApp https://wa.link/sjtpvc
01- Protection Engineers (04 Nos)
Qualification: Bachelor’s Degree in Electrical / Electronic Engineering from a reputed
University.
Experience:
• Work experience in a live system is mandatory
• Minimum 8 years' experience in Protection of in HV, Distribution systems 11 KV live system maintenance with similar utility /Live system.
• Experience in testing of Electromechanical / Static / Numerical Relays, Testing of CT/VTs, Numerical relay configuration, Relay firmware, setting, testing, Pilot differential/Fiber optic Differential Protection commissioning, Directional Over Current/Directional Earth Fault Protection commissioning, troubleshooting of Protection and controls system, Grading, SCADA & GOOSE.
• Candidate shall have good proficiency in English – to Speak, Read & Write.

02) Protection Technician (10 Nos):
Qualification:
• Diploma / Degree in Electrical / Electronic Engineering
Experience:
• Engineering Diploma holder with Minimum 5 Years of Protection experience or Engineering Degree holder with Minimum 2 years of experience, in Protection of in HV Live system, 11 KV Distribution systems with similar utility.
• Candidate should be well familiar with Numerical/static/Electromechanical relay settings,
• testing etc.
• Candidate shall have good proficiency in English – to Speak, Read & Write

03) Cable Technicians (3Nos)
Qualification:
• 3 years Diploma or bachelor’s degree in electrical /Electronic engineering from a reputed university.
• Technical course certificate (ITI) in the electrical trade or equivalent with more than 12 years of experience also can be considered.
Experience:
• Minimum 5 years’ experience in Cable fault identification of MV, and LV Distribution systems.
• The experience in cable system fault identification with similar utility /Live system
• Technician to have experience in fault location & identification of Pilot cable.
• The experience required in Pilot/LV cable identification, Locating the buried cable, locating faulty cable point & Joint and Cable ends, and repairing faulty cable joints.
• Work experience in a live system is mandatory.
• Candidate shall have good proficiency in English – to Speak, Read & Write

04) Battery Charger Technician (03Nos).
Qualification:
• 3 years Diploma or bachelor’s degree in electrical / Electronic engineering from a reputed university.
• Candidates with a technical course certificate (ITI) in the electrical trade or equivalent with more than 12 years of relevant experience can also be considered.
Experience:
• Minimum 5 years' experience in Battery Charger / UPS system in Electricity Utilities / OEMs.
• Candidate should be familiar with the rectification of battery charge issues, attending faults, Preventive & corrective Maintenance, etc.
• Experienced in repairing electronic components/equipment such as Battery charger units, UPS, rectifiers, inverters, Filters circuits, testing instruments, etc.
• Candidate shall have good proficiency in English – to Speak, Read & Write

05) Assistant Technicians (17 Nos)
Qualification:
• Technical course certificate (I T I) or Diploma in Electrical/Electronics.
Experience:
• Minimum 2 years of experience in Industrial wiring, Electrical maintenance, repairing electrical appliances & Machines, etc.
• Preference will be provided for those with experience in testing relays & meters, Cable termination & jointing, and maintenance of battery charger units.

06) Fitter (01)
Qualification:
• Technical course certificate (I T I) / Diploma in Electrical/Mechanical.
• Candidates with a Secondary School Certificate or equivalent with more than 12 years of relevant experience can also be considered.
Experience:
• Minimum 5 yrs. experience in MV switchgear-related fitting/cutting works, preparing sheet metal frames & Metallic boxes.
• Familiar with making necessary cut-outs on the LV compartment of indoor switchgear and fixing marshaling boxes.
• Candidate shall have good proficiency in English – to Speak, Read & Write

Calibration Lab Manager
Qualification
An engineering Degree preferably in Instrumentation, Mechatronics, or electronics.
Experience
A minimum of 7 years of experience in an accredited calibration laboratory to the standard ISO 17025.
The accredited scope of the laboratory should cover the parameters Force, Pressure, Temperature, Dimensional, Electrical, Mass, etc.
Experience in planning and implementing business development/ sales strategies.
Experience in customer relationship management.

To apply for the job, use the following link
http://www.pstechqatar.com/jobs/detail/16999

Calibration Technician
Qualification
Diploma in Engineering, preferably Mechanical or Electrical or Electronics or Equivalent.
Experience
Minimum of 5 years of Experience in calibrating several different disciplines of test & measurement equipment such as Electrical, temperature, pressure, and electronics, etc.

To apply for the job, use the following link
http://www.pstechqatar.com/jobs/detail/17000