Arnquist Musical Designs

Run EMT and mount the 220 plug .

Ugh! My trusty old Compressor . Retirement time . Time for the updated and larger unit.

Someone had epoxied the rods in place . A big mistake . I got the fretboard off . To start the rod removal I used two pieces of 14 gauge wire mounted in a Weller soldering gun . Each section of wire was jammed under an end of the rod . With the two ends in place ...the gun was plugged in and the trigger pulled . This heated the wires...which heated the rods . As they began to come loose I pried up the threaded end ...and heated the exposed rod with a torch . That made the process move along much faster .
It did not char the wood . It did crumble the epoxy . A win situation .

The fretboard had popped loose at the nut. Typical . Someone had removed the fretboard ...poured epoxy into the rod cavities...poorly reglued the fretboard . Time to deal with all of that.

A HUGE project .step one on the bass transformation . Remove these terrible tuners and replace with the Schaller made "old Kluson R tuners. Space them correctly .

Another project , a late 1960s ES335 restoration project .