Additive Repair Solutions

💥 Another Fix in the Books! 💥

We took a gamble on a “for parts only” printer from eBay — just $100. Honestly, we weren’t sure what we’d get… but when we powered it on, we noticed it only had 45 hours of use. Basically brand new! 🤯

Even better? It came with Bambu’s free gift and accessories kit still inside the box. 🎁

We ran a full function test and calibration — passed with flying colors. So what was wrong?
When we tried a test print, nothing came out… 🤔

After a little digging, we found a 2-inch piece of broken filament lodged in the nozzle. Once that was cleared, the printer fired right up and printed perfectly. 🙌

👉 Moral of the story: don’t sell your non-functioning printers!
Most of the time, it’s a simple fix that just needs the right tools and know-how.

📍Located in Seymour, CT
💬 Message is or call 203-828-0777 — we’ll get your printer running like new again!

🔥 Another save in the books! 🔥

This time we picked up a Bambu Lab Carbon X1 with 1,100 hours of use. The owner ran into an error saying the cutter was broken/stuck. They tried to fix it themselves… but ended up causing more issues bu damaging the circuit board. Frustrated and unable to get it working, they listed it for sale at $400.

We grabbed it, took a closer look, and here’s what we found:
🔧 The connectors had been swapped around — once corrected, the machine powered up just fine.
🔧 We swapped in a $10 circuit board to ensure all connections were solid.
🕒 In under an hour, the Carbon X1 was back up and running like a champ. 🚀

That’s the beauty of what we do: sometimes a “dead” printer just needs the right eyes, steady hands, and a little know-how. What could have been a wasted $400 turned into a fully functional, high-end printer — ready for more hours of creating.

💡 If you’ve got a 3D printer that’s down, don’t give up on it. Let us take a look — we might just surprise you with how quick (and affordable!) the fix can be.

📍 Serving Seymour, CT and surrounding areas
💬 Message us today to get your machine running again!

💡 Imagine this…

You buy a brand-new 3D printer, run it for only 72 hours, and then it clogs.
Frustrated, you give up and decide it’s not worth fixing.

That’s exactly what happened with a Bambu Lab A1 Mini we just picked up. The owner didn’t want to mess with the repair, so we bought it for $125.

Here’s the twist: this “dead” printer only needed:
🔧 A $20 hot end heating assembly
🔧 A $13 nozzle + hotend
🔧 A $3 silicone sock
🕒 And just 30 minutes of our time

➡️ For less than $40 in parts, this machine was back up and running like new.

Most people would have tossed it aside. We see it differently—this is the heartbeat of our new business: repairing, restoring, and giving machines a second life.

✨ Why spend hundreds on a replacement when a quick fix will do the trick?
✨ Why let frustration win when we can solve the problem for you?

If your 3D printer is down, don’t give up on it. Send it our way—we’ll breathe life back into it.

📍 Serving Seymour, CT and beyond
💬 Call, Text, or Message us today and let’s get you printing again!

Additive Repair Solutions is your go-to expert for maintaining, repairing, and optimizing Bambu Lab 3D printers. Whether you’re dealing with clogged nozzles, misaligned beds, or finicky filament issues, we’ve got the skills to get your printer back in top shape. Our team specializes in diagnosing and fixing common (and uncommon) Bambu Lab printer problems, ensuring your prints stay flawless. From routine maintenance to emergency repairs, we help you print stronger, faster, and without frustration—because failed prints belong in the past, not on your build plate.

Give us a call Today!