SilversmithingClass.com

This Patent Pending Bail Perfect Centering Tool removes the guesswork in setting a bail. It , makes it easy to locate and mark where the bail or ring shank should go on a symmetrical bezel set on a ring or pendant

This tool uses a sliding V-shaped guide that forces the bezel into an opposing V-shaped guideforcing the bezel's centerline to be aligned with the marking slot in the guide. Once positioned, you can mark or scribe a line, lines, or points where you want your bail on the front or back of your piece. Please check our videos for some of the tips and tricks for using this tool to its maximum potential.
There are 5 slots for marking, all of which will be parallel to the centerline of the bezel. The maximum bezel size that can be accommodated is 2 1/2in by 1 5/8in x ¼, 63mm by 41mm x 7.6mm.
The Minimum bezel size in 3/16in x 1/4in x 3/32, 6 mm x 5mm x 2.3mm. The Bail Perfect Centering Tool is accurate to .5 in three inches. Parallelism is within .5mm on a 75 mm back plate or .02 inches on a 3-inch back plate.
It is made in the USA using a non-toxic recyclable high-impact flexible PETG plastic, stainless steel, and synthetic hypoallergenic rubber. Included with biodegradable The Bail Perfect Centering tool is an ultrafine point felt marker pen, 2 sample plastic bezels for training, 6 synthetic non-allergenic rubber bands, and 1 alcohol swab.
Create Your Dreams:
Unique Tools and Jewelry Making are Classes Available at
Please see my bio now for more information.
Order now at https://www.amazon.com/dp/B0F229TZRR

Bezel Setting Tool Kit -Ergonomic Bezel Setting Tool Set for Rings & Pendants
This set of tools was designed to make setting a cabochon on the pendant and rings easier and less painful, primarily for jewelry makers suffering from arthritis and other hand and wrist issues (each tool is also available separately).
Either the 2 or 2.5-inch Rotating mounts are useable for most projects. The 2-inch works best with pendants and rings less than 1 square inch of the backplate, and the 2 1/2-inch works best with bezels larger than 3 square inches of backplates. See FAQ's for more info.
After testing in the field, we found that non-suffering users love the ability to hold the setting firmly while rotating it for easier positioning of the hand and bezel tool.
They really love that if you slip, they don’t mar the bezel or the stone!
The components are:
a rotating bezel mount.
a Thermo-Loc® heat release adhesive, (Thermo-Loc®, is a registered trademark of Glendo Corporation)
an Ergonomic Bezel Pusher.
an Ergonomic Bezel Burnisher.
Your pendant is secured when it is pressed into the Thermo-Loc® mounting plastic that has been heated with a heat gun or high-temperature hair dryer.
The mount is rotated with the non-dominant hand to bring the bezel into different positions.
The bezel is easy to work with, either ergonomic tool that fits in the palm of the hand.
After the stone is secured, the ergonomic bezel burnisher is used to harden and polish the edge of the bezel.
Once the bezel is closed, the assembly is lightly heated to remove it from the rotating mount.
The 3d printed high-impact plastic prevents the stone and bezel from being damaged
in the event of a stone destroying slip of the hand.
Link to 7 minute How to use video https://vimeo.com/708875190 Lint to 1 minute How to use video https://vimeo.com/708890123 Link to 10 minute How to prep for Rings https://vimeo.com/708879669 Link to 1 minute How to prep for Rings https://vimeo.com/709177108

Create Your Dreams:
Unique Tools and Jewelry Making are Classes Available at
https://SilverSmithingClass.com