WA Fencing and Gates

Did you know?

All our CENTSYS range of operators come standard with battery backup and all operators come with option of 240V, Low-Voltage and Solar Input.

-240V INPUT-

Electrician to provide a power point close to operator location or hard wire straight into operator.

-LOW-VOLTAGE INPUT-

We provide a step-down transformer, that being either 240 to 12V or 240 to 24V depending on operator size.
We also provide either a 5M or 30M Low-Voltage 2 x core cable which can be wired directly into the operator.
This option will normally apply if there is no close access to a power point and/or the cost to bring power point to motor location is too expensive then you are able to plug in transformer in the house/garage and bring the low-voltage (12V) cable to operator yourself.
Installing the operator using this option will bring costs down for customers by a significant margin.

-SOLAR POWER-

Solar option is great where the above two options cannot be achieved.
All solar kits normally include the following;
1 x Solar Panel bracket that can accommodate solar panels ranging from 20W to 150W.
1 x Solar Panel either 40W for 12V operators or 80W for 24V operators.
1 x Solar regulator 12/24V
1 or 2 x 12V 33AH Deep Cycle battery depending on operator size.
1 or 2 x Battery Enclosure/s depending on operator size.
1 x MC4 Solar Panel Connector Kit

LIST OF OPERATORS THAT CAN BE SETUP USING EITHER 240V, LOW-VOLTAGE OR SOLAR.

SLIDING GATE OPERATORS.

- D2 TURBO 12V DC (UP TO 250KG GATES)
- D5 EVO 12V DC (UP TO 500KG GATES)
- D5 SMART 24V DC (UP TO 500KG GATES)
- D10 SMART 24V DC (UP TO 1T GATES)
- D20 SMART 24V DC (UP TO 2T GATES)

SWING GATE OPERATORS.

- VANTAGE 400 (12V DC)
- VANTAGE 500 (12V DC)