Roemech

ROEMECH
Engineering Solutions

6/136 Tolley Road St.Agnes
0419 035 520

Machinery Repair
Machining of Parts
Modification of Parts
Modifications to Machinery
General Machining

ROEMECH recently completed a BMW E82 diff center modification. The client wished to install a RacingDiffs limited slip conversion kit, ROEMECH machined off the welded crown wheel, assisted the client with the installation of the limited slip conversion kit. Then TIG welded the crown wheel back into place. As part of the conversion the drive fl**ge output shafts needed 4mm machined off the spline, ROEMECH machined these for the client as well. The client was very happy with the results.

ROEMECH
Engineering Solutions

6/136 Tolley Road St.Agnes
0419 035 520

Machinery Repair
Machining of Parts
Modification of Parts
Modifications to Machinery
General Machining

ROEMECH recently completed modifying a pair of DragWay rims for a client's custom car build. The rims needed to become zero offset, needing to reduce the current offset by 18mm, the centers were moved in the rims 12mm, the spokes in the centres were machined to a chamfer to blend the exposed extra 12mm of center spoke into the rim, then 6mm was machined off the rear face of the rim centre. 10 New washers were made for the wheel nuts to allow for the 6mm removed from the rear face of the rim centers.