Andrew J. Wainwright - Fine Woodwork

The first picture shows the router set-up I used to create the large bevel on the underside of the top, and the second some of the hand planed details on the bottom edges of the top itself. Then I set the top on the base, always an interesting moment. Time for some finish: it will be interesting to see how the ebonized base goes with the cherry top!

The top of this table is to be cherry. I wanted a particularly attractive piece as I feel this design showcases the top. Sorting through my lumber collection, I came across a spectacular board: 17" wide, 10' long and somewhat incredibly, with only 1/16" of cup. The latter is important as this top is relatively unsupported, so starting with a naturally flat piece results in a naturally stable top.
After highlighting some of the grain patterns, I cross cut the board, carefully trimming it to size to best show the grain. I then flattened and planed the boards, gluing the two halves together.