Shanghai Addith Hardware Co.,Ltd.

Push to Open Latch.
The exact color temperature of this product is assured by its mature technology. The product has different color temperatures for customers to choose for different applications.

Push to open 3-fold steel ball bearing slide.
The product features a high-gloss finish. Thanks to the RTM process technology which provides smooth on both sides, it has enough attractiveness.

Application and display of T Type Handles
Product: Stainless steel handle
Material : Stainless steel
Finish : SSS/PSS/PVD/AB/AC
Diam : 10/12/14/16/18/20MM
Hole pitch : 64MM-480MM
Passed SGS, ISO 9001, 2000
Enquiry WhatsApp click: https://wa.me/8615874076627
email: [email protected]

1. Mark the Door
Mark the place on the door where the hinge cup will be installed by using a combination square to make a horizontal line that is 3.5 inches away from the top and bottom edge of the door. Make sure the line is inset ⅞ inch from the edge of the door.
2. Drill the Cup Holes
Place your hinge on one edge of the line you drew and adjust it to make sure you are installing the hinge at the right position. Use a pencil to mark around the hinge. Then attach the 35-millimeter Forstner bit to your drill, position it so that it is on the center of the mark you just made, and bore into the door. Drill all remaining cup holes the same way.
4. Mark the Cabinet
Shim the door against the cabinet and measure the small gap between the cabinet door and the cabinet surface. This distance is usually 1 ⁄16 inch (0.16 cm). Now make a vertical line on the cabinet 21/4 inch from the edge of the cabinet. To mark the top and bottom of the cabinet, take your gap height, and add 3.5 inches to it. Measure this distance from the top and bottom of your cabinet and make a horizontal line for each mark. This line should intersect the vertical line you made before.
5. Install the Mounting Plate on the Cabinet
Separate the mounting plate from your hinge, place it on the intersection of the two lines you drew, and drill it into place. Use a self-centering drill to make screwholes and attach wooden screws inside. Do this for all the mounting plates.
6. Mount the Door
Hold the door in the open position, bring it close to the cabinet, and align the hinge with the mounting place. Then clip on the hinge onto the mounting plate with a click. Open and close the door to make sure the hinges work smoothly and are placed correctly.