Safety Learner

🦺Based on the handwritten list in your photo, these are the SABIC Life Saving Rules (LSR).Following these rules is mandatory to prevent serious injuries or fatalities at any SABIC site.Below are the standard definitions and examples for each rule as required by SABIC safety standards:🚧

1. Safe System of Work●
🔴Definition: Never conduct work without a valid Work Permit and a proper riskassessment (JSA/HRA).● Example: Before starting a welding job, you must obtain a Hot Work Permit and ensurethe area is cleared of flammable materials.

2. Confined Space Entry●
🔴Definition: Never enter a confined space without a specific Confined Space EntryPermit, gas testing, and a dedicated standby person.● Example: Before entering a storage tank for inspection, the atmosphere must be testedfor oxygen levels and toxic gases, and a "Standby Man" must be stationed at the entrypoint.

3. Safety at Height●
🔴Definition: Always use personal fall protection equipment (PFPE) when working at aheight of 1.8 meters (6 feet) or more, or where a fall hazard exists.● Example: Wearing a full-body harness and hooking it to a certified anchor point whileworking on an elevated platform without permanent guardrails.

4. Lifting Operation●
🔴Definition: Never walk or stand under a suspended load. All lifting must be planned andperformed by certified personnel.● Example: During a crane lift, the area is barricaded, and no employee enters the "dropzone" while the load is in the air.

5. Line Break●
🔴Definition: Do not open any process pipe or equipment containing hazardous materialswithout verifying isolation, depressurization, and drainage.● Example: Before opening a fl**ge on a chemical line, ensure the line is "Zero Energy"and wear the required PPE (like a chemical suit) in case of residual spray.

📕Safety interview questions and answers. 📕

Common questions for HSE Interview, 📕
Group discussion questions 📕
Safety officer interview questions 📕


Please like follow and share 🙏🙏🙏