Analyzer CAE - Engineering services

The future of engineering is not just innovation—it’s responsibility.

This Earth Day, let’s commit to designing solutions that are efficient, sustainable, and built for a better tomorrow.

Because every simulation, every design, and every decision can contribute to protecting our planet.

Let’s engineer a greener future.

On this auspicious occasion of Akshaya Tritiya, may prosperity, growth, and success continue to multiply in every endeavor.

Wishing you and your organization endless opportunities and achievements.

Happy Akshaya Tritiya!

✨ May the blessings of Lord Ram bring peace, strength, and righteousness into your life.

Wishing you a graceful and auspicious Ram Navami. 🙏

On the auspicious occasion of Gudi Padwa, we are delighted to share our festive wishes with all of you.

May this new year bring fresh opportunities, growth, and continued success for everyone.

Wishing you and your families a very Happy Gudi Padwa!🌺✨

❤️

On the birth anniversary of Chhatrapati Shivaji Maharaj, we remember a leader who dared to dream of Swarajya in times of adversity. From a young age, he stood firmly against injustice and went on to lay the foundation of a strong and self-reliant kingdom built on courage, strategy, and good governance.

His history teaches us that no challenge is greater than determination. With vision, bravery, and integrity, even the impossible can be achieved.

This Shiv Jayanti, let’s be inspired to dream big, lead with courage, and stay committed to our goals.

*Jai Bhavani! Jai Shivaji! 🚩*

𝐀𝐢𝐫 𝐝𝐨𝐞𝐬𝐧’𝐭 𝐫𝐞𝐚𝐝 𝐝𝐫𝐚𝐰𝐢𝐧𝐠𝐬, 𝐈𝐭 𝐟𝐨𝐥𝐥𝐨𝐰𝐬 𝐩𝐫𝐞𝐬𝐬𝐮𝐫𝐞, 𝐆𝐞𝐨𝐦𝐞𝐭𝐫𝐲, 𝐚𝐧𝐝 𝐎𝐛𝐬𝐭𝐚𝐜𝐥𝐞𝐬.
In car parks that means hidden dead zones near columns, ramps, and tight corners.

We used cfd to see what site measurements miss: velocity fields, recirculation pockets, and pollutant plumes. then we iterated duct/jet-fan placement, Grille sizing, and supply exhaust balance to sweep pollutants along a clean path to extract.

𝐇𝐢𝐠𝐡 𝐕𝐚𝐥𝐮𝐞 𝐅𝐢𝐧𝐝𝐢𝐧𝐠𝐬
• Ramp inflow + column arrays created low velocity pockets, Small grille shifts cleared them
• Re-aiming one jet fan moved the plume off pedestrian routes without chasing higher ach
• Balancing extraction smoothed the pressure field and reduced stagnant air zones

𝐖𝐡𝐲 𝐭𝐡𝐢𝐬 𝐦𝐚𝐭𝐭𝐞𝐫𝐬
Clear airflow paths → Easier commissioning, Safer operation, and Fewer retrofit headaches before concrete and cable trays lock you in.

𝐒𝐞𝐞 𝐭𝐡𝐞 𝐚𝐜𝐭𝐮𝐚𝐥 𝐩𝐥𝐮𝐦𝐞 𝐦𝐚𝐩𝐬, 𝐒𝐭𝐫𝐞𝐚𝐦𝐥𝐢𝐧𝐞𝐬, 𝐚𝐧𝐝 𝐏𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐥𝐨𝐠𝐢𝐜 𝐢𝐧 𝐭𝐡𝐞 𝐟𝐮𝐥𝐥 𝐛𝐫𝐞𝐚𝐤𝐝𝐨𝐰𝐧.
👉 Tap on the link in bio to read our full case study .

𝐖𝐡𝐚𝐭 𝐢𝐟 𝐲𝐨𝐮 𝐜𝐨𝐮𝐥𝐝 𝐜𝐚𝐭𝐜𝐡 𝐝𝐞𝐬𝐢𝐠𝐧 𝐟𝐚𝐢𝐥𝐮𝐫𝐞𝐬 𝐦𝐨𝐧𝐭𝐡𝐬 𝐛𝐞𝐟𝐨𝐫𝐞 𝐭𝐡𝐞𝐲 𝐜𝐨𝐬𝐭 𝐲𝐨𝐮 𝐚 𝐫𝐞𝐝𝐞𝐬𝐢𝐠𝐧?
In highpower EV chargers, managing 1.5 kW of heat within compact enclosures is a major design bottleneck. Without predictive simulation, overheating can trigger thermal runaway, shorten component life, and delay product launch.

Analyzer CAE used CFD based thermal simulation to evaluate airflow paths, fin geometry, and component placement, replicating real-world heat transfer under operating conditions.
Early simulation insights helped our client re-engineer internal layouts before prototype manufacturing, reducing hot spot temperature by 20 °C and eliminating costly trial iterations.

𝐎𝐮𝐭𝐜𝐨𝐦𝐞
Reduced thermal risk and improved system reliability.
Achieved target junction temperatures safely below limit.
Cut future redesign costs by up to 40 % through early design validation.

Discover how CFD simulations can turn “guesswork” into “data-driven confidence.”

𝐑𝐞𝐚𝐝 𝐭𝐡𝐞 𝐜𝐨𝐦𝐩𝐥𝐞𝐭𝐞 𝐜𝐚𝐬𝐞 𝐬𝐭𝐮𝐝𝐲 𝐨𝐧 𝐨𝐮𝐫 𝐰𝐞𝐛𝐬𝐢𝐭𝐞 𝐨𝐫 tap on the link given in the bio.

𝐄𝐕-𝐜𝐡𝐚𝐫𝐠𝐞𝐫 𝐫𝐮𝐧𝐧𝐢𝐧𝐠 𝐡𝐨𝐭?
This quick carousel shows how CFD led thermal optimization turned a heat trapped enclosure into a stable, Efficient design without upsizing the box.

Tap on the link in bio to read full case study!

EV Charger • CFD driven thermal optimization
hot chargers slow down and fail quietly.

We use cfd to map heat zones, tune airflow paths, and validate cooling so your charger stays fast, safe, and reliable before prototyping. want the case study or a quick feasibility check? Comment “EV Thermal”.

𝗕𝗮𝗹𝗹 𝗺𝗶𝗹𝗹 • 𝗙𝗘𝗔 𝗳𝗼𝗿 𝗿𝗲𝗹𝗶𝗮𝗯𝗶𝗹𝗶𝘁𝘆 & 𝗰𝗼𝘀𝘁 𝗲𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆
𝗯𝗮𝗹𝗹 𝗺𝗶𝗹𝗹𝘀 𝘁𝗮𝗸𝗲 𝗮 𝗯𝗲𝗮𝘁𝗶𝗻𝗴.

Our FEA verified multi load and fatigue performance, optimised material where it matters, and cut weight without compromising safety. 𝗡𝗲𝗲𝗱 𝗮 𝗱𝗲𝘀𝗶𝗴𝗻 𝗿𝗲𝘃𝗶𝗲𝘄 𝗼𝗿 𝗹𝗶𝗳𝗲 𝗮𝘀𝘀𝗲𝘀𝘀𝗺𝗲𝗻𝘁? 𝗱𝗺 “𝗺𝗶𝗹𝗹 𝗳𝗲𝗮”.

𝐒𝐨𝐦𝐞 𝐩𝐫𝐨𝐛𝐥𝐞𝐦𝐬 𝐝𝐨𝐧’𝐭 𝐬𝐡𝐨𝐰 𝐮𝐩 𝐮𝐧𝐭𝐢𝐥 𝐲𝐨𝐮 𝐬𝐢𝐦𝐮𝐥𝐚𝐭𝐞 𝐭𝐡𝐞𝐦.
That’s what happened during the FEA of an industrial pump what seemed structurally sound revealed hidden stress concentrations under cyclic loading.

By performing fatigue and vibration analysis, we helped enhance the pump’s durability, ensuring long-term reliability and safety.

What if a hidden stress zone could trigger a costly shutdown?

In heavy industries like cement and minerals, ball mills are the backbone of production yet they often face cyclic, static & dynamic loadings that create invisible fatigue risks.

At Analyzer CAE, we partnered with a manufacturer to validate a newly developed ball mill design.