Quality Fasteners

TINE TILLER

Ideal for general cultivating, weeding, pasture renovating and preparation of seed beds for different crops. The tiller is fully mounted on tractor by means of category I & II with 3 point linkage.
The spring loaded tines swing back under breakaway pressure, pass over the obstruction and return to the working position without affecting the depth of the implement

Product Description
Features:
The above tiller is mainly used in the stony soil & it’s designed in such a way that can be used for the Light and Medium soil conditions. In this two longer frame made of angles are used to facilitate wider spacing of tines. Springs Loaded Tines of this design have a very new looks as they are long from the top looks as the springs are attached through twisted flats
SPECIFICATION 7 Shanks 9 Shanks 11 Shanks 13 Shanks 15 Shanks
Frame 65 x 10 mm (Angle) 65 x 10 mm (Angle) 65 x 10 mm (Angle) 65 x 10 mm (Angle) 75 x 10 mm (Angle)
Spring 9.5 mm WD 50 mm OD 27 Coils 9.5 mm WD 50 mm OD 27 Coils 9.5 mm WD 50 mm OD 27 Coils 9.5 mm WD 50 mm OD 27 Coils 9.5 mm WD 50 mm OD 27 Coils
Tynes/Shanks 50 x 19 mm EN – 9 Forged 50 x 19 mm EN – 9 Forged 50 x 19 mm EN – 9 Forged 50 x 19 mm EN – 9 Forged 50 x 19 mm EN – 9 Forged
Pairs 50 x 6 mm Angle 50 x 6 mm Angle 50 x 6 mm Angle 50 x 6 mm Angle 50 x 6 mm Angle
Anchor Pin 22 mm 22 mm 22 mm 22 mm 22 mm
Frame Bolt 12 x 35 mm 12 x 35 mm 12 x 35 mm 12 x 35 mm 12 x 35 mm
Tyne Bolt 16 x 80 mm 16 x 80 mm 16 x 80 mm 16 x 80 mm 16 x 80 mm
3 Point Linkage 50 x 12 mm (Rear) 65 x 12 mm (Front) 50 x 12 mm (Rear) 65 x 12 mm (Front) 50 x 12 mm (Rear) 65 x 12 mm (Front) 50 x 16 mm (Rear) 65 x 16 mm (Front) 50 x 16 mm (Rear) 65 x 16 mm (Front)
Shovels 10 mm EN – 45 10 mm EN – 45 10 mm EN – 45 10 mm EN – 45 10 mm EN – 45
Weight 180 Kgs. (approx.) 225 Kgs. (appox.) 275 Kgs. (approx.) 345 Kgs. (approx.) 425 Kgs. (appox