Most Wanted Mods

Multibeam Activator (US/CA cars)

The MWM module allows you to activate all (7) functions of the MultiBeam headlights.
• Adaptive Highbeam Assist Plus switches automatically between:
– Dipped beam
– Partial main beam (not available as US/CA cars)
– Main beam
The partial main beam uses the main beam to shine past other road users rather than dazzling them. The vehicle in front is illuminated by the dipped beam. The advantage is that parts of the roads with no cars illuminated much longer distance as Main beam is still ON there
• Active light function
The headlamps follow the steering movements. Relevant areas are better illuminated while driving. the active light function evaluates the course of the lane in which you are driving and adjusts the light in advance. The function is active when the dipped beam is switched on.
•Cornering light improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for example. It can only be activated when the dipped beam is switched on.
The function is active:
– At speeds below 25 mph (40 km/h) when the turn signal light is switched on or the steering wheel is turned.
– At speeds between 25 mph (40 km/h) and 45 mph (70 km/h) when the steering wheel is turned.
Roundabout and intersection function: the cornering light is activated on both sides through an evaluation of the current GPS position of the vehicle. It remains active until after the vehicle has left the roundabout or the intersection.
• The motorway mode increases the range and brightness of the cone of light enabling better visibility.
• Enhanced fog light function
The enhanced fog light function reduces the glare experienced by the driver and improve the illumination of the edge of the carriageway.

•The adverse weather light reduces reflections in rainy conditions by dimming individual LEDs in the headlamps. This reduces the glare for the driver and other road users.

•City lighting improves the illumination of roadsides within built-up areas using a broader distribution of light.

MWM LOWERING MODULE

Some people want to lower their cars if they want to stand out among others or they think that their car looks cool when it's low. And they are right. Our Suspension Lowering module is devised to lower Mercedes Benz cars. Using our OBD2 Plug you can change level wherever you want in 30 sec.
Key benefits are:
- no need to go to the dealer, no wires, no soldering, no car disassembling
- No need to connect the device to a laptop, smartphone, PC
- All the settings are performed via Control Wheel (or numbers) and COMMAND display
- Restoring factory level in 30 seconds
- Our module stores current user settings so you do not need to keep it connected
Compatible with following Mercedes with AIRMATIC suspension:

- S-class - w221, w222, c217
- CLS-class - w218, c257
- E-class - w212, c207, w213, c238
- C-class - w205
- GL/GLS-class - x166
- ML/GLE-class - w166, с292
- GLC-class - x253

The module has the following settings:

- Factory – sets the suspension level to factory settings
- Low – factory - 32mm front and rear 

- Custom – user selects the height, 1 step = 1mm, min -70mm, max +40mm, front and rear separately

For w213 E-class we have the largest list of Mods:
- ECU tune Stage1/2 - remembers Stage1 and Stock maps
- Exhaust Flap Selection (always on) - allows you to fully open the flaps and get the loudest exhaust system sound
- Dynamic Select memory mode - remembers any other default Dynamic Select mode instead of Comfort.
- ECO start-stop memory mode - you won't need to turn it off every time you start the engine
- MultiBeam LED module - Activates all MultiBeam headlight functions such as Adaptive Highbeam Assist Plus, Active light function etc.
- Ambience Light Premium - gives you the opportunity to select individual Multicolor settings for the interior lighting
- Video in Motion - Activation
- AMG63 cluster menu

Mods are installed via OBD module, no technical intervention required, just plug-and-play

DM Questions please 📨

Looks awesome lowered , agree ?

All OBD-2 functions available for GLC63S:

• Lowering module
• ECU OBDtune (Stage1/2)
• Multibeam LED Activator (US/CA)
• ECO start stop off
• Exhaust flap selection module
• Dynamic select last mode
• CarPlay activator

Key benefits are:

- no need to go to the dealer, no wires, no soldering, no car disassembling
- No need to connect the device to a laptop, smartphone, PC
- All the settings are performed via Control Wheel (or numbers) and COMMAND display
- Restoring factory level in 30 seconds
- Our module stores current user settings so you do not need to keep it connected

WWW.MWMODS.COM