G and R Woodworks.

Walking/ Hiking Cane. ( C- 4 ) I made this cane using a Red Oak dowel, and for the handle I cut a 6 piece of 2 X 2 Oak board. This Walking cane stands 36 tall and weighs about 2 lbs. I cut most of the handle shape using a scroll saw, then I attached the handle to the dowel using a double ended lag screw and drilled the handle,

Walking Cane// Hiking Cane// Cane C21 To create this walking Cane I removed the bark from the stick, and cut to height. To make the handle I cut a piece of 2x2 with a scroll saw, I shaped it using an orbital sander and on occasion I attached it using a double ended screw 3 X 1/4 , and wood epoxy. I used a Black Artist marker, and drew

Walking/ Hiking Stick. I used a wood dowel to make this Walking/ Hiking Stick. After sanding it smooth I taped in a spiral pattern, and outlined using pencil. I then taped again in a spiral going the other way to get the pattern I wanted. I wood burned all lines, and then a dot type pattern on one way, and vertical lines

Maras Special order I sanded a Poplar dowel , and drew the multi color rings using Artist markers. I added several coats of exterior grade polyurethane. I added a leather strap, and a rubber tip for added traction and protection.