T/REX TECHNOLOGY LLC

Same day turn around. Made two 54 in Long by 30-in OD cylinders to make a 9 ft setup from 3/16 stainless.

This job definitely pushed the plate roll today, even though it's a 3/8 by almost 7 ft. Long capacity in mild still rating I took and cut and rolled this piece of 3/8 hardox 500 tuff for a bucket liner and 4 different radiuses. Yeah it was a bastard and I had to manipulate the machine to make the tight radius. Still impressed but it wasn't fun.

Thursday and Friday was truss manufacturing and install front porch day. As always turned out badass and on point. Front of the house is definitely going to be busy after a couple more pop outs get put up with Windows in them going to be fancy