Prospeed Autosports

New Dynocom Gen-V Platform featuring new DPM ( Dyno Processing Modules ) having the following capabilities: DPM V1.1 Real Time 200 MHz 32BIT RISC MCU Arcitecture 10/100T Ethernet Full/Duplex 2x CAN 2.0 Ports supporting add on CAN devices such as ( AFR, Analog Inputs, Thermocouple Inputs, Knock, Expansion Analog/Digital I/O and ECU CAN integration, HPT Tuners, etc…) 12x 12Bit Analog Input Channels 8x Digital Input Channels 8x Digital Output Channels 4x Relay In/Output Channels 2x Frequency Output Channels via PWM USB 2.0 3.5” Color LCD Configuration Panel 8 x 24Bit Digital Analog Inputs at 125KHz ( 2 Reserved for Load Cells) 4x Frequency Digital Input Channels ( Encoder, Engine RPM, etc…) RS232/485 Input Channels 2x 16bit Digital Output PAU Channels 2x VFD Drive Capable for AC Motor Control Quad Cascade PID Control at 1mS Update Rate Power Isolation Up to 6 DPMs can be cascaded to provide for up to 6 Individual controlled Axles * Options : Bluetooth V5, Wifi, Expansion CAN, New Digital IGBT Closed Loop PAU Controller w/ 10mS Update Rate – 240VAC/75 AMP Communication with new Quantum R/T ( Real Time ) Software w/ New Vector 3 Standard Muti-Ramp, Sigmoid, S-curve, J-Curve, Cubic, Exponential, Power, and Spline capabilities.

We have been quiet on shop postings but here is what we've been working on! One of our returning customers wanted a classic that can perform/drive like a brand-new car. Then take it to the drag strip and drive it home! This will be the first project under our Prospeed Classics division where we build 1 of 1 classic car's that actually perform. Now you Grand Nationals guys don't get too upset over this ha-ha!

Build specs:
Grand National
LME 1500HP LS with Dart LS Next block, Prospeed billet valve covers
Grannas T56 with custom manual conversion
RPS Carbon triple clutch
LSA Supercharger with Kong intercooler lid
Xona Rotor turbochargers
Prospeed custom turbo system with Stainless Bros 625 Inconel bends and Inconel 3D printed collectors
Turbosmart WG and BOVs
Prospeed custom exhaust system
Prospeed 1500hp E85 fuel system with Fuel Injector Development injectors
Prospeed Motec M150 engine management package with ProDrag Racing Electronics firmware
Motec C1212 Digital dash
Motec PDM full car power management
Coatings by Coates Powder coating
The blackest of black custom paint job by LDCustoms

Sake Bomb is getting close to complete from the fabrication work at Prospeed. We will be back at a track soon! #2jz #promod