Engineered Source Inc

🚛These custom torsion springs were manufactured using .090 diameter music wire material with .80-.95% carbon content and 230-399 ksi tensile strength. Both legs measured 4.45" center to center with a 120 degree angle. Zinc clear finish was applied to finish the parts for the architectural assembly application.

🚜These custom alloy steel metric cone point set screws were manufactured in alloy steel material with M12 - 1.75 rolled thread and 60MM length underneath the cold formed square head. The square head measured 13MM X 13MM X 12MM in height. The cone point incorporated a 9MM diameter shoulder to assist in assembly on the production floor.

✈️Custom custom Inconel 718 double thread offset studs were manufactured for our aerospace customer. The offset head, double thread, and hardness of material made these parts extremely difficult to manufacture. The head radius measured .203" and a combination of 5/16-24 2A and 1/4-28 2A thread was cut to a length of .842". Definitely one of the toughest parts we have dealt with - the hardness of the material created countless issues with tool life. Full certs with FAIR were provided with the parts.