D.S.R.E.

95 5.0 rebuilt with speedmaster heads, E303 cam, 9.4:1 mild build

A lot of my racing beginnings here

Burr finish Port Match for Oval Port BBC Marine engine

Here you go mr William's, 1rst page

After way too many set backs igot some numbers off My 317's set up for boost, these are Joe Samwell's heads i did an experiment i have been wanting to try and Joes been soooo darn Patient i had to throw in extra
so far stock 2.00''in 1.55''ex valves stock valve job
at 28" H20 219cc intake runner
SF600 bench with 1-7/8 pipe100in 77in 66ex200in 143in 116ex300in 207ex 174ex400in 263in 208ex500in 299in 224ex600in 316in 233ex
This was what they had been stuck around100in 71in 60ex 200in 139in 110ex300in 198in 157ex400in 253in 189ex500in 293in 204ex600in 302in 210ex
that was a 215cc intake runner but same test equipment back to back.
it takes so much time doing it by your self wo funding but i am
very happy with what i have now and honestly i think even NA they will work well, Sorry for the delay Joe, almost finished!!!