TT's FabWorks

Recently have made a few changes to the rear SF kits, nothing that changes anything about the stock spring install, just simplifies the use of the GM 64” rear springs.
This change does not affect any of the long bed kits, it’s just not possible since the front bracket lands on the arch of the rear frame.
Description will be with the pictures attached.
Below is the location of a (reasonably) high quality .png image for leaf spring sizes.
https://www.ttsfabworks.com/ttimages/leafspringchart.png

Nothing new here since March but I did manage to revive this from at least 10 years back.
Custom 2” wide perch sets for some SJ axles going under a ‘59 Chevy truck down in the land of OZ.

So this is done with 20 sets going to BJ’s so that will shorten your shipping time and I can maybe work on my own junk.

http://www.ttsfabworks.com/ttimages/stockrackbraces.html

76 holes through 3/16” plate, that’s almost 12” of steel.
Bending starts tomorrow.
http://www.ttsfabworks.com/ttimages/shackles.html