Joyride Hot Rods

Now available Vintage Cotton Braid Spark Plug wire for use with modern ELECTRONIC IGNITION SYSTEMS.

CHECK OUT OUR EBAY STORE OR OUR WEBSITE www.joyridehotrods.com

Made in the USA, 7.8mm Lacquer Covered Cotton Braid over EPDM Insulation and Spiral Wound Suppression Core specifically for use with modern electronic ignition systems, including MSD 6A, 6AL Multi Spark Ignition Boxes and Pertronix Electronic Ignition Conversion Kits.
The Lacquer allows you to easily wipe of any dirty hand marks or oil stains.

Please Note: Many of the cheaper 7mm or 8mm wire out there on offer, most probably will not have the suppression core and this will cause problems with the micro chips used in modern electronic ignitions.

Currently sell in a length of 25ft, that is more than adequate for all popular V8 engines with a universal Terminal and Boot kit to allow you to route the wire as you please, cut to length and crimp the terminals yourself. (A correct crimper is recommended but is not included in this kit).

This terminal kit only works with 'Socket' style Distributor Caps.....if you have a 'Post' style distributor cap, they need similar terminals used on spark plugs, let us know and we will exchange the terminals as required.

4 colors available but more will come in time.
Complete specific engine kits with wires cut and terminals fitted are planned for the near future.

Auto swap at Canton. People here and King Julian are so nice! Makes work a pleasure!